What do you use to cut granite? Choose either a standard circular saw or a wet-cut circular saw to cut granite. Either will work, but the wet-cut circular saw will produce very little dust, thanks to a small tube that drizzles water onto the surface of the granite as you cut.
Cut granite slab outdoors if possible to simplify cleanup. Can you cut granite countertops after they are installed? After many years in the countertop industry, we've come across many homeowners asking if their granite countertop can be cut or modified to fit their new cooktop, fridge or new sink. Surprisingly, the answer is yes, this can be achieved, with the help from Surface Link of course! How do you drill through granite?
It takes time to penetrate the hard stone. Put on gloves, safety goggles and a dust mask. Measure the diameter of the hole you need. Measure the location of the new fixture. This means that this blade has a continuous rim combined with a serrated edge.
This makes this blade widely compatible with power tools such as tile saws, circular saws, and grinders. It is very easy to cut naturally with this blade.
It cut fast, too. However, it does not leave a clean and smooth cut when you use it on human-made stones despite having the ability to cut fast. In fact, it might not have the same cutting ability if you use it on human-made stone then revert back to cutting natural ones. Also, take note that this blade can be quite aggressive. It may cause small breaks on the surface as if the blade chiseled some of it away instead of making a smooth and precise cut.
When you do use this blade, make sure to take your time and get a lot of control over how you work the blade. You will get the best results if you use water when cutting with this blade. It will reduce the dust and allow the blade to make better and quicker cuts. This is not the most affordable option out there. In fact, it can be quite pricey. However, when you look at how long you will be able to use it before you have to buy a replacement plus its quality, then it is a product that you can consider as good value for money.
This product is a hot-pressed diamond turbo blade that you can use for Granite, marble, tile, concrete, brick, and other types of masonry. If you are looking for a blade that does not only make efficient deep cuts, then this one might just be what you are looking for. It can also be used for grinding natural and human-made stones and other construction materials. Other than that, this can be used for both wet or dry cutting.
However, when cutting Granite, you will get the best result from this blade if you use the wet method. It will allow you to cut better without dealing with excessive dust. This is a pretty good cutting blade for Granite, but you might experience some flange problems with it, especially when you are using it on a 9-inch angle grinder.
The flange is the part used for mounting abrasive or diamond blades to the saw. This blade is fairly easy to put on and off, but the flange positions the blade slightly outside the grinder guard, which can be a little awkward. However, this issue can be easily remedied by removing the flange.
When you do, you will not have any issue mounting the blade, so it is not a huge deal-breaker. It also provides excellent quality cuts in terms of Granite, so that also constitutes why it has an excellent value for money. Suppose you are looking to save and have a big project ahead that requires many tasks involving cutting stones.
You can simply directly contact them and see what they could provide you with. When it comes to making angled cuts or circular shapes on Granite, low-quality blades tend to cause a lot of chips. What sets this blade apart from its competition is its excellent curved cutting capability.
It can cut very hard materials such as concrete, stone, and Granite without any chipping issues. This is very important if you want to achieve a smooth and clean cut. Several users also noted that this blade works well on paving stones such as bricks. It can make bevel cuts and angle cuts sharply as well.
However, do take note that if you intend to use this blade dry, it will create a lot of dust, so if possible, switch to a wet saw for a more convenient and efficient cutting experience. According to several users, although this blade is not as aggressive compared to other similar ones, it does last longer. Making the back-cut is a must because the granite material becomes very thin just before the sawblade breaks through the last bit of stone at the end of the slab.
Without the back-cut, vibrations from the saw could likely cause chipping or even break off a chunk. After making the back-cut, reposition the saw at the opposite end of the slab and cut slowly along the cutline. Focus on keeping the blade aligned precisely on the cutline and maintain light and steady pressure on the saw without forcing it, letting the blade do the work. Depending on the length of the cut, this could take 15 minutes or longer.
Peel the tape from the granite and admire your smooth, clean cut. Allow the granite dust to settle and suck it up with a shop-type vacuum. Slurry left on a sidewalk or driveway can be easily rinsed away with a garden hose. Make cuts in granite tile with a wet-tile saw. Unlike a circular saw, which is handheld, a wet-tile saw is stationary and the tile rests on a sliding table.
Wet-tile saws vary widely; some come with lasers to help align the tiles , adjustable guides, or the ability to make beveled cuts, but they all work on the same principle. Fit the tile saw with a diamond blade labeled suitable for cutting granite.
Download Article Explore this Article parts. Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Part 1. Wear safety goggles and a dust mask while handling the saw. This will keep granite dust from harming or irritating your eyes while you cut. If you're working in a dusty area, put on a dust mask as well to keep your lungs clear. You may also want to wear earplugs or protectors if you are sensitive to loud noises. Do not wear gloves while using a saw.
No gloves are strong enough to protect your fingers, and gloves will weaken your grip on the saw. Keep your hands bare and free of any bracelets and other jewelry to avoid snagging your hands on the blade. Tie back any loose hair and avoid wearing baggy clothing. Take off all accessories, especially face and hand jewelry, before you use the saw. Roll up your sleeves so your forearms are bare to keep any fabrics from getting caught in the saw.
Check the saw for the correct blade before cutting the granite. Make sure you have fitted your saw with a diamond-cut blade in the right size. The wrong size or type of blade can damage your saw and potentially result in injury. Part 2. Use a tape measure or straightedge to plan your cut.
Between the options, a straightedge is preferred because it can keep your line more even when you're ready to mark it. Position the tape measure or straightedge slightly to the left of the line you want so you can mark the line with tape later. Place a line of tape directly to the right of the tape measure or straightedge. Painter's tape or masking tape is ideal because it is easier to readjust.
Apply it as close to the measuring tool as possible to keep your line straight and even. Draw a straight line over the tape with a marker. This is the line your saw will follow as you make your cut. Use the measuring tool to keep the marker line straight as you draw it over the tape. If you mess up on the line, remove the tape, reapply a new strip, and start over.
If you make a mistake on the line, it will be harder to remove.
0コメント